Welcome - Please Read

Welcome. I wanted to provide stripboard layouts I've made to help people new to electronics and even the more experienced get into different aspects of electronics.

I verify the layouts before I post them.

My Facebook Group: www.facebook.com/StripboardLayouts - Please Add For Updates!
My Twitter Thing: @InSonicBloom

Tuesday 4 August 2015

Very Accurate 10volt and 5volt Reference For Testing Multimeters etc. Stripboard Layout


I thought this would be a good project to keep around to see if my digital multimeter has drifted out of calibration.

I power it from a normal bench power supply but it would probably be better if you used 2 9v batteries in series.

The LED on it displays when over 100mA is being drawn from it - basically if the LED is lit disconnect it or things will be getting very hot!

I tested it in free air with open windows over 2 hours and it was very stable so I can rely on it.

Linear Tech do a few different drop references for this IC
the 2 I've tried are the 10 volt reference and the 5 volt reference
the part numbers are
10 volt reference; LT1021BCN8-10
5 volt reference; LT1021CCN8-5



it stayed at 10.0006 for over 2 hours - the least significant digit moved around but that's 10's of uVolts!